Styrene Thinner clay High Temp Epoxy Surface Coat

High Temp Epoxy Surface Coat and High Temp Epoxy Resin can create tough

Our System 4500 is a low viscosity epoxy system designed for the fabrication of parts and structures by the resin infusion method

Our NIOSH Approved combination cartridges provide an all-in-one solution for respiratory protection

It is an important consideration for process control and workability during composite fabrication

and the 4 oz is an excellent balance of handling ease and transparency

Styrene Thinner clay High Temp Epoxy Surface CoatStyrene is the recommended thinner when using polyester and vinyl ester resins and gel coats. All polyester and vinyl ester resins contain styrene monomer. Thinning resins and gel coats are not usually necessary but can be performed for applications where a lower viscosity is desired (spraying or infusing). Fibre Glast recommends adding styrene at no more than 5% to maintain the physical properties of the resin or gel coat Styrene thinner, also known